Can I convert my tiller model to a remote control?
Yes. We have factory conversion kits available for 4hp engines and above. To convert a tiller model to remote, you will need an S.R.C. kit (all the parts and pieces required to create linkage under the cover) and a control box for throttle and shift. In addition, if you wish to have remote steering you may require a steering link arm or hook plate. We recommend professional installation by a qualified marine professional. Below is the cost of converting your tiller model outboard to remote control with the required items mentioned above:
4, 5, 6hp = $445 (for use with manual start only; electric not available)
8, 9.8hp = $475 or $495 (for use with manual or electric start)
15, 18, 20hp = $525 or $575 (for use with manual or electric start)
25, 30hp = $525 or $575 (for use with manual or electric start)
40hp = $525 or $575 (for use with manual or electric start)
NOTE: Kits do not include the (2) 33C universal control cables for throttle and shift (these can be purchased locally based on your boat's specific length requirement). The kit does not include a steering system. Again we recommend that you purchase this universal item locally based on the length required by your application. (the cost these items will vary locally, but generally will cost about $225.00 for both of these items)
